Crown FM250 Bedienungsanleitung PDF herunterladen (Seite 19)

3–4

FM10000 User’s Manual

3.3 Front Panel Controls and Display

Refer to illustration 3-1 for additional information when going through section 3.3.

3.3.1 Remote/Local Switch

The Remote/Local switch is used to be able to 'break' the interlock line from the 

remote control unit to allow for local control of the High Voltage supply that 

feeds the PA's. It has a green LED which illuminates when the switch is in the 

remote position (allowing for control via remote control unit) and a red LED 

which will illuminate when the switch is in the local position (disabling the 

remote control from turning on the high voltage). See illustration 3-3.

Illustration 3-3 Remote/Local and Local Enable switches with indicators

3.3.2 Local Enable Switch

The Local Enable Switch is used to enable the high voltage supply for the PA's 

when the Transmitter Controller is in the 'Local' mode. The switch in the ON 

position (up, or 1) will enable the supplies and illuminate the red indicator 

LED. The switch in the OFF position (down, or 0) will disable the supplies and 

extinguish the red LED. See illustration 3-3.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 37 38

Keine Kommentare

Crown FM250 Bedienungsanleitung Seite 19