Crown FM250 Bedienungsanleitung PDF herunterladen (Seite 10)

2–2

FM10000 User’s Manual

2.1 Operating Environment

You can install the FM10000 transmitter on any flat surface which should be clean and

well-ventillated as possible.

2.2 Tools Required

To install the FM10000, you will need the following tools:

❑Medium phillips screwdriver

❑Small flat-blade screwdriver

❑ /

❑

❑ESD (Electrostatic Discharge) protection grounding strap and/or mat.

2.3 Unpacking

3/16 inch hex driver

1/2 inch wrench and/or nut driver

1) Remove outer crate.



2) At the bottom of the cabinet are retainer brackets holding the 

cabinet to the shipping platform. Use 1/2 inch wrench to remove 

these brackets.



3) Carefully move the cabinet off the shipping platform to the 

position of final installation using appropriate methods to ensure the 

cabinet doesn't tip over.



4) Cabinet is now ready for installation.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 37 38

Keine Kommentare

Crown FM250 Bedienungsanleitung Seite 10